Marriage vs Types of Separation

What is the link between married life and separation?

On reading the long separation agreements, I discovered several types of divorce or separation in connection with earlier conjugal life. Schematically of course, three types of separations can be distinguished.

The first is that of women who have bet on the couple and the family, even if they give up many things for themselves. At one point, they realize that their husband has invested little, and even sought elsewhere sexual and effective satisfactions. They feel denied and eventually they explode and get angry.

The second separation is new in history. They are women who want above all to realize themselves. Their spouses accompany them in this self-construction until the day they no longer play this role. These women think that they are at another stage of their personal development: they must move forward, and move on, without that partner. They can keep this ex as a friend since they do not hate him.

The third type is a compromise between the other two. These women have reconciled both a personal life, a commitment to professional life and a conjugal and family life. They do not want to renounce either their “I” or the “we” family. A few years later, they may be disappointed by what they call masculine egoism, their companion preferring too much his “I”. They are angry with him and leave him painfully. We can say that we separate as we have lived.

What does separation tell us about love?

Separation transforms love into two levels. On the one hand, the fact that divorce is a possible event modifies the amorous imagination: love can be born several times throughout life (this is not, however, polygamy, contrary to what some commentators assert ). It is no longer about sex.

The second transformation comes from the fact that most women only want to stay with their companion or husband if the latter is sufficiently attentive to her. Love becomes more and more conditional: we only continue if the balance is positive.

What About The Men?

Overall there has been a surge in divorce in the last few years with divorce lawyers for men like this cashing in on men who wish to be represented fairly.

With alimony payments increasing who can really blame them?


Tips for changing the oil in your car

Having a car necessarily involves maintenance. Even if you stick to the bare minimum, you will sooner or later change the oil in your car, change the brake pads, and often replace the suspension components.

If some mandatory maintenance require specialized equipment, the oil change can be done at your home, with almost no tools (Warning: some municipalities do not allow their citizens to change their oil on their own Inquire about the laws of your municipality with your town hall). In this case you would have to hire a pro like the Jonesboro auto repair experts.

Going to a garage for an oil change usually costs more than $60, while if you do it yourself, you will not really spend more than $20 for your oil, and $5 for your oil filter. So you really don’t save much with DIY.

If your car is rented and/or covered by a warranty, make sure that your contract authorizes self-maintenance.

So here is our practical guide to successfully changing your oil at home!

If necessary, please refer to our photo gallery, on the right, for a visual guide!

What You Need

To succeed in your oil change, you do not need a lot of things. You need a sufficient amount of motor oil, a cloth, a new oil filter, wide clips, a funnel and a container large enough to temporarily hold your used oil. It is also recommended to have the necessary tools to unscrew nuts.

Be sure to consult your owner’s manual for the type of oil you need, as well as how much you will need!

1st step: get the engine warm

This detail may seem trivial, but it is important to drive the vehicle before the oil change. If it is necessary to change its motor oil, it is because over time it is filled with metal particles that hinder the lubrication of the moving components. If the oil is changed cold, the particles, then deposited in the bottom of the oil tank, will not be eliminated. Over time, they can even form harmful deposits.

This is why we recommend that you drive your vehicle until the oil temperature reaches its operating point. This “point” is usually reached when the needle of the oil temperature gauge is toward the middle of the graduated scale. If your vehicle does not have an oil temperature gauge, wait for the “cold engine” light to go out. Afterwards, let the vehicle rest for about ten minutes, and proceed to the next step.

2nd step: empty the waste oil

To drain your used oil, you need to know the location of your oil pan. It is a metal tank that is usually under the engine. For easy access, lift the car with a jack, and hold the lift with appropriate brackets. However, the ground clearance of your vehicle may be high enough to avoid lifting it.

Under the casing there is a nut. It serves as a cork to the tank. Once removed, this plug will allow almost all the oil contained in your engine to flow. Be sure to place the container under this cap before unscrewing it. Once the stopper begins to be less tight, you can finish unscrewing it by hand, but be careful not to burn yourself with the hot oil, and beware of splashing! The best advice here is to unscrew the cap while maintaining pressure on it. Be careful not to lose the sealing washer found on most cars!

If you want to accelerate the process, you can remove the plug on top of the engine compartment, usually stamped with an oil jug. This is the motor oil filler cap.

3rd step: replacing the oil filter

In order to optimize the performance of the engine oil, it is filtered so as to remove most of the metal particles of the contents. The filter usually takes the form of a metal cylinder in which there is a paper filter element. Often sold at around $5, it is imperative to replace it at every oil change, but validate the instructions contained in your owner’s manual; Some special, more efficient, but more expensive filters may need to be replaced at different intervals from oil changes.

Generally, the oil filter is located near the housing. To replace it, nothing could be simpler. Loosen it with pliers, preferably with specially designed round pliers, and then unscrew it by hand. This filter can be recycled.

You can now install a new filter. However, be sure to cover the rubber strip which is used to seal the filter with a thin layer of oil; To do this, moisten your finger with oil and slide it along the strip. This will improve the tightness. Ideally, use new oil for this operation.

Tighten the new filter by hand, and tighten with the clamp; The special clamp designed for this purpose takes on its importance here because it is easy to drill a filter by exerting too much pressure with a standard clamp. Again, it is important to validate here the manufacturer’s instructions. Needless to force too much: in general, a quarter turn is enough.

4th step: put oil

Here is undoubtedly the most important step. Do not forget to put some oil in the engine, otherwise you will not get 5 kilometers before it is reduced to rubble.

Fortunately, this is also the easiest step. Simply insert a funnel into the duct you previously removed the cap. Slowly pour the appropriate amount of oil into the funnel (owner’s manual will show you the required viscosity and quantity). If you go too fast, there may be overflows.

To ensure that the level and quality of the oil are good, you can start the car a few minutes, then turn off the engine and check the oil using the gauge for this purpose. If your vehicle no longer has a gauge, as on some BMWs, you can check this information from the car’s on-board computer.


Congratulations, you just changed the oil yourself!

Helpful Rug Cleaning Tips

For any home, rugs are one of the more elegant decorations to be had.  However, your rugs will eventually become stained and dirty over time no matter what kind of fabric they are woven from. The only way that your rugs can remain “dirt” free is for you to wrap them up in plastic, and we all know how impractical of an idea that would be. Your rugs can become dirty or stained for a variety of reasons such as liquid spills,  food stains, debris, dirt, dust, and mud stains. All of these will make your rug look very unkempt and unattractive, so what should you do in this case?

While some stains will prove to be a bit stubborn to  remove, there are others that can be taken out quite easily. Here are a  few helpful rug cleaning tips that can help you out.

1. Whenever you start to notice any stains on your rugs, the first thing you need to do is to get your vacuum cleaner, ASAP! A vacuum cleaner’s brush is actually quite effective in helping remove the stains from your carpet.  If dust particles and debris are the reason for your rug’s stains, then you will not have to do anything else except using your good, old vacuum cleaner to get them off your rug. If the stains do not get removed after your very first attempt, then try repeating the process again and again. However, if the stain still won’t go away, then it will be time for you to proceed to our next step.

rug stain

2. The fringes on your rugs  are not meant to be cleaned with your vacuum cleaner. You can use a  knife or your own fingers to do that. External fabrics such as fringes can cause damage to your vacuum cleaner if they get stuck in the  machine. So if you see any stains get left behind, make sure to remove  them by using your fingers.

3. The next rug cleaning tip that we have for you is using shampoo. However, you should remember that  detergents and shampoo are made with chemicals that might be harmful to  synthetic rugs. But for other kinds of rugs, using shampoo is perfectly fine. To use it, simply spread the shampoo on the part of your rug that  has a stain on it. Keep rubbing the stained area until the shampoo creates enough foam.

4. After you are done with the shampoo, it  will then be time for you to wash out the wet area of your rug and have it dry out. Keep in mind to not let the whole drying process take more than twelve hours because if it does, then there is a good chance that your rug will become faded.

5. Last, but not least, remember to wash your rug as soon as you notice any stains on it. This will help preserve its originality because waiting for a while before you wash it
might make the stain a permanent fixture on your beloved rug.

6. If you cant get the stains out yourself because your pet had an accident, then don’t be scared to hire a professional to do the job.  For the state of North Carolina there is an excellent company that provides area rug cleaning in Cornelius. As always make sure to check the companies credentials and make sure they are reputable.

If you follow these tips we are confident that you can get your rugs looking their best.

Toxin Management of the Government

govThe Toxic Substances Management Policy of the Canadian Federal Government puts forward a preventive and precautionary approach to deal with substances that enter the environment and could harm the environment or human health. The political results of stakeholder consultations, held between September 1994 and April 1995, after the publication of the federal government working paper for the policy of toxic substances management and the complementary document Criteria for selection of substances for disposal Virtual.

Ensuring that federal programs are consistent with its objectives, the policy provides decision makers with direction and sets out a management framework. It will also be the centerpiece of the federal government’s position with regard to the management of toxic substances in discussions with the provinces and territories and negotiations with the world community.

The two key management objectives were:

  • elimination from the environment of toxic substances that result predominantly from human activity and those which are persistent and bio accumulative (track 1)
  • management of other toxic substances and substances of concern throughout their life cycle to prevent or minimize their release into the environment (track 2)

wasteAlthough socio-economic factors have no impact on the ultimate goal for a Track 1 substance – its virtual elimination from the environment – we will take into account to determine and implement risk management measurements within the framework of the policy. For example, they help clarify the interim targets, appropriate management strategies and timelines. Socio-economic factors will help determine long-term environmental goals, objectives, strategies and timelines for the Track 2 substances.


Many of the goods and services we rely on,  use or discharge substances that may have adverse effects on the environment or human health. We found that if we do not manage the risks associated with these substances, we may have to deal with very expensive or almost impossible to correct problems. Scientific studies have shown that this was the case particularly of substances resulting from human activity and that are toxic, persistent (which decompose slowly) and bioaccumulative (accumulate in living organisms).

As science is not always possible to predict accurately the effects of a substance on the environment or human health, more effective management of toxic substances requires a proactive and cost-effective approach to prevent pollution rather than reacting after the fact.

The Toxic Substances Management Policy of the Federal Government puts forward a preventive and precautionary approach to deal with substances that enter the environment and could harm the environment or human health. Ensure that federal programs are consistent with its objectives, the policy provides decision makers with a plan.

The federal government already administers several programs to reduce or eliminate the threat posed by toxic substances. This policy emphasizes the need to apply the principles of pollution prevention in all these programs and to respond to growing public pressure, which is that the government protects the environment and human health while creating jobs and opportunities in the economy.


The policy provides scientific decision-making framework for the effective management of toxic substances that are of concern because they are or may be used and released into the environment or because Canadians may be exposed through the environment.

The policy guides federal regulatory and non-regulatory programs by defining the ultimate goal of management for a given substance. It applies to areas of federal jurisdiction, given the distribution of legislative powers between the federal, provincial and territorial governments.

It considers that a substance is intended for a systematic assessment of whether federal, provincial or international or Canadians have considered potentially harmful to the environment or human health.

A substance is considered toxic if, after rigorous scientific assessment, it is consistent or equivalent to the definition of “toxic” from the Canadian Act, Environmental Protection Act (CEPA).

Other substances that do not meet the definition of “toxic under CEPA” or “equivalent toxic under CEPA ” may be of concern because of their potential to harm the environment or human health. These substances may be the subject of a management response to these concerns or specific obligations. These substances of concern will be determined through scientific assessments. It could be, for example, substances subject to special regulations (such as new substances in the Information Regulations New Substances of CEPA ), substances managed under federal-provincial agreements ( such as nitrogen oxides and volatile organic compounds that are managed as smog precursors) and substances managed in accordance with international commitments (such as sulfur oxides that contribute to acid rain).

environThe policy recognizes the need to apply a cautious approach to identifying substances and implementing cost-effective measures to prevent environmental degradation.

Since toxic substances or substances of concern can originate from Canada or abroad, actions Canada must be supported by international measures to protect the Canadian environment. Canada acting as a leader in the development of international activities, the policy will be the centerpiece of its position with regard to the management of toxic substances in the negotiations with the world community.